-
Details
-
Category: Producer Artificial Stone
artificial stone nano cement plast, from various mineral compounds and mineral linking agents, different materials for stamina and nano compounds, various polymer materials, mineral pigments, polymer bonding fields and more, it is made.
The advantages of using building facade stone produced in HUNAM artificial stone company include:
The weight of artificial stone is much less than natural stone, according to the design, from 12 to 25 kg / m2
Easy cutting and piercing in artificial stones, especially in facade bricks, it is not necessary to use electric cutting tools
Very low dust, when cutting facade and flooring
The very high artificial stone adhesion to building materials
Ability to choose simple and hybrid colors, when ordering artificial stones
High color resistance of facade stones in the face of sunlight and acid rain
No intrusion of darkness in the internal tissue of artificial stone
Thermal resistance of artificial stone up to 200 degrees indirect
Glacial resistance of facade stone, up to 50 degrees below zero
The right price for artificial stone with a variety of stones and materials
And many more ...
No intrusion of darkness in the internal tissue of artificial stone:
In natural stones, it is glossy when it is installed and has a special effect, due to the use of gloss resins on the surface of natural stones. due to atmospheric factors such as exposure to sunlight and acid rain, ... after a while, the resins will be destroyed, and the stone will be darkened. after removing shiny resins, the water absorption of natural stone has increased and because of the absorption of surface water, the soil and contaminants present in the surface, penetrate into the stone, and the stone over time becomes more darken.
With dirt and dust which penetrated in the stone, in continuous and discontinuous cavities in the rock tissue, bacteria, algae and fungi also penetrate. and over time, these bacteria and fungi grow, and after their death, blackness and greens appear in the tissue of stone.
Because of the very low water absorption (less than 3%), superficial and deep molecular densities, and the absence of continuous and discontinuous cavities in the internal tissue of artificial stone, artificial stone have been excluded from the darkness penetration in the internal tissue of stone.
More adhesion power of artificial stone with building materials:
Due to the non-homogeneity of the coefficient of expansion and contraction of natural stones and concrete and slurry behind the work, over time, the stone is separated from the body of the building, and this will cause damage and ugly appearance in the building.
To solve these problems in natural stones, solutions are presented:
Creating a scope behind the stone, which, due to rust, has been useless over time, and after a while, the stone is separate again from the building's structure.
Installing facade stone on the surface, which also gives the building an ugly appearance and is not welcomed by consumers.
Artificial stone, due to its mineral base, are more in harmony with building materials and has more adhesive strength.
The lower price of artificial stone facade in the consumer market, relative to the natural stones of the building:
Natural stones, in the market of the country, with a very high price, are available to customers. for example: Non-quality stones such as travertine, which formerly were known as waste stone, now it has been used with cutting, sub, polishing and putty in the body of most buildings.
The lower weight of artificial stone, compared natural stone of building facade:
Volumetric mass of natural stones 2800-2700 kg / m ^ 3
Travertine stones with a mass volume of 2500 kg / m ^ 3
concrete with a mass volume of 2400-2300 kg / m ^ 3
Volumetric mass of artificial stone in mode:
Normal 2200 kg / m ^ 3
Semi-lightweight 1700-1500 kg / m ^ 3
Ultra-lightweight 1100-500 kg / m ^ 3, which will be much lighter than natural stones.
Very good resistance to artificial stone facade, against frost, temperature and heating tolerances:
In natural stones and concrete, due to high water absorption, and water penetration in the internal texture of stone and concrete, due to cold weather, water penetrated in continuous and discontinuous holes, have been freezing and by freezing the water in their tissues and increasing the volume of ice, natural stone and concrete, will crack and fracture.
therefore, the use of stones with high water absorption in cold regions is not recommended.
Due to very low water absorption, artificial stones have a cold resistance of up to 50 degrees below zero.
Also, natural stone, ceramic tile and concrete, due to atmospheric factors and temperature changes (expansion and contraction), will have cracks in the tissue or will be broken down, but artificial rocks with cold tolerance up to minus 50 degrees Celsius as well as temperature tolerance up to a positive temperature of 350 ° C and tolerate 500 different temperature cycles, due to the cooling, high temperatures and temperature tolerances, they will not suffer from such problems.
Sound insulation and heat of artificial stone:
Stones in mass from 1100 to 500 kg / m ^ 3, In addition to reducing the weight of the building, due to the use of special materials and compounds, sound insulation and thermal insulation in the building body and will save energy, also, up to 40% of the sound will be insulated
Less erosion of building artificial stone than natural stone:
Other items such as variation in design, color and dimensions of artificial stone| bending strength is higher than concrete and natural stones | the similarities of natural stones, such as marble and granite, can be named.
