Unfortunately, many of the companies providing machinery, technology dealers, and concrete machine makers are not paying attention to the specificity of artificial stone facade & mosaic polymer mixers and offer concrete machines and conventional blocks to the cost of artificial stone machines and equipment. also, they have given some cases under the title artificial stone facade & mosaic polymer, that's why applicants are losing money.
In other sections of the site, there were noted titles and differences mixers and vibration tables in vibration mosaic technology and blocks as well as mixers, vertical vibration tables and artificial stone facade & mosaic polymer production line equipment referred.
so in this section only refers to the little tips: Horizontal vibratory tables can't create the required specifications in artificial stone in a limited time, and due to limitations in time, vibration of artificial stone facade & mosaic polymer products due to the high concentration of these materials Requires a powerful vibration with two electric motors - is to create vertical blows. also to create integrated shots on the whole surface, these tables should be 100 * 200 cm or 200 * 300 cm in size. also, because of the failure of the chassis of the vibration tables and the twist of the surface sheet, must be use the chassis 14 in the small vibration tables and the chassis 16 plus the central chassis in large vibration tables, and 8 mm aerodynamic plate at the surface of the vibration table used. the reason for using the chassis 14 at the small vibration table is to prevent the central chassis from break up, because two 500-600 KG electrical motor are consumed and, in order to have a suitable vibration, considering the high piece weight, vibration engines must be considered with this power. also, in large vibration tables, the production of artificial stone facade & mosaic polymer, due to the power of vibrating motors between 1300 and 1400 kg, Because of higher weight due to the use of chassis 16 - as well as preventing the central chassis from breaking down and using the wide width central chassis 16 - the use of 8 mm lattice sheet, due to the avoidance of bending, resulting in a higher overall weight, should be taken into account. therefore, if the machines - the vibrating table used in the production of artificial stone facade & mosaic polymer - in accordance with the above also not in different parts of the site, the ability to use in the production of artificial stones will not be.
About mixers: It is also observed that block mixers or concrete mixers and ... as artificial stone facade & mosaic polymer production machines offered to applicant stone. HUNAM artificial stone / BAGHERI machinery doesn't make horizontal vibrating tables in any way, but blocks and concrete mixers are produced by HUNAM artificial stone company to produce blocks and vibration mosaics.
Dear applicants: please note that artificial stone facade & mosaic polymer mixers are different because of the difference in materials and additives and the characteristics of the artificial stone facade & mosaic polymer. concrete and block mixers will eventually be able to carry artificial stone facade & mosaic polymer materials - standardized and original formulation - to rotate around them,in this case, due to the lack of not mixing and lack of polymeric reactions and ... you can't produce real artificial stone facade & mosaic polymer with concrete and block machine. Mixer rpm required in the production of blocks, about 20 to 25 are far away, in the case of artificial stone facade & mosaic polymer mixers, it is about 36 rpm.Artificial stone facade & mosaic polymer mixer arms between 35 and 40 mm and adjustable,with blades with a specific angle and resistant against abrasion and in the number of 5 to 6 arms with regard to the diameter of the mixer but in blocks and concrete mixers in numbers from 3 to 4 according to diameter and with different angles and with sheet. For example, in artificial stone façade & mosaic polymer mixer assuming the same body diameter and height with a concrete and block mixer, using a 15 HP electrical motor and a gearbox 185, this mixer will be able to make about 400 kg of artificial stone facade & mosaic polymer with normal density, but as you can see below, assuming the same volume, with a 10 HP electrical motor, block mixer will have the capacity to produce 700 kg.
We hope that the advice provided will be taken seriously to prevent future losses.
Block Mixers and Vibration Mosaics made by HUNAM company (BAGHERI Machine Manufacturing) the following specifications are available:
250kg concrete mixer and block mixer: Block / concrete mixer with a capacity construction of 250 KG with a single-phase 3-HP electrical motor and a gearbox 110, with strap and foley, with cast iron wheels 13,with the wall thickness of the mixer 8 mm and the thickness of the floor sheet of the mixer 10 mm, with valve 7 and 8, the diameter of the mixer is 110 cm and the height of the mixer body is 35 cm, according to the buyer's opinion.
500kg concrete mixer and block mixer: Mixers of making block/concrete materials with the power to produce and manufacture 500 kg of concrete and block materials,with a three-phase 7.5-HP electrical motor and gearbox 150, with Strap and Foley with cast iron wheels 16,with the wall thickness of the mixer 8 mm and the thickness of the floor sheet of the mixer 10 mm, with gate 7 and 8, the diameter of the mixer is 125 cm and the height of the mixer body is 40 cm, with the ability to install the engine and gearbox from above or from the bottom according to the buyer's mixer.
700KG concrete mixer and block mixer: Mixers of making block/concrete materials with the power to produce and manufacture 700 KG of concrete and block materials, with a three-phase 10-HP electrical motor and gearbox 185, with Strap and Foley with cast iron wheels 16, with the wall thickness of the mixer 8 mm and the thickness of the floor sheet of the mixer 15 mm, with gate 7 and 8, the diameter of the mixer is 140 cm and the height of the mixer body is 40 cm, with the ability to install the engine and gearbox from above or from the bottom according to the buyer's mixer.